 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Windows 3.x Dial-Up Instructions
Here are a set of instructions that will help you set up the ShivaRemote Dialer to connect to Hawk Internet Services.
Launching ShivaRemote Dialer
In Program Manager, open the Netscape folder and double-click on ShivaRemote Dialer.
Creating a New Connection
Now a dialog box will pop up asking you to fill in some details to create a new connection file
1. Enter a description for
your Internet connection like UNT Internet.
2. Enter your Hawk Internet
Account username, for e.g.: abc0001
3. Enter your account password.
4. Click on Properties.
Phone Number
Enter the Phone number of
the server (list
of numbers) without the area code except for Dallas users.
If you need to dial a number
to get an outside line (for e.g. UNT Residence Hall users) or want to
disable to call waiting, then check on Build Number to Dial
and select the desired dialing property. Also enter the phone number
at the bottom.
Modem
Modem Type
displays the name of your modem provided the drivers for your modem are
already installed. If your modem is not listed, click on New
to setup your modem. Modem Configuration allows
you to edit the properties of your modem.
Service Provider
Enter the following for the DNS hosts :
Primary DNS: 204.178.185.5
Secondary DNS: 204.178.185.105
Protocols
Dialing
Under Dial on Demand,
check on Enable to allow ShivaRemote
automatically connect to the Internet when you launch an application that
requires an Internet connection, such as Netscape Navigator or an email
client like Simeon.
You can also set up ShivaRemote
to redial if, for example, the line is busy.
Do not check on Request
roaming Dial-back since our remote access servers do not support
this feature.
Connection
Once you have established
an Internet connection, ShivaRemote can automatically pull up an application
like Netscape or Simeon. To do this, check on Automatically
start: and type the path of the application or click on Browse
to find the application.
If you want ShivaRemote
to drop your Internet connection after a certain amount of time of inactivity
(or incase you forget to disconnect), check on Disconnect after:
and specify the time after which you want the connection to be dropped.
Click on O.K.
after you are done. Before you exit ShivaRemote,
save your connection settings by going to File->Save Connection
File.
Connecting to Hawk
After launching ShivaRemote
Dialer, open your connection file by selecting File->Open
Connection File and click on Connect.
